VANS Gyplast is a pure gypsum based plaster suitable for most internal wall and partition surfaces including brick, block and concrete. It consists essentially of pure gypsum hemihydrate formulated with special additives to control application and setting characteristics. It contains pure gypsum in natural form, eliminated from all impurities. It gives plaster an unmatched work-ability because of its smoothness, coverage and ease of application. When dried it provides a super white, smooth and fine finish.

Why Choose Gyplast?

Pure Gypsum Green Product

Ultra White And Ultra Smooth

Excellent Strength On Drying

Humidity Resistant

Other Features

  • Single coat application. Can be directly applied
  • High coverage up to 92 m2/t
  • Enhanced light refection, imparting true color tone and gloss for paint
  • Compatible with any type of paint.
  • Mixing Ration - 1:1.25 Water and Gypsum Powder by volume
  • Thickness can go up to 32mm for walls and 10mm for ceilings
  • 12 months shelf life.
  • Crack free
  • No powdering
  • Fungus free
  • Fire resistant
  • Lightweight
  • Thermal resistance
  • Affordable

VANS Gyplast Compatibility

VANS Gyplast can be applied directly on all the Hard Surfaces as shown below.

Recommended Application Methodology

Step 01
Prepare Wall Surface
The wall surface should be thoroughly clean before applying Van Gyplast

Step 02
Wetting Wall Surface
Pre-wet the substance before applying VANS Gyplast

Step 03
Mix VANS Gyplast
Mix VANS Gyplast in water. Water to plaster ratio should be(1:125)

Step 04
Apply VANS Gyplast
Apply mixed plaster on the substrate and level it with an aluminium bottom scale.

Installation Process

Product Comparison Chart

Products Comparison Sand Cement Plaster Plaster of Paris VANS Gypsum Plaster
Direct Application
Line & Level
Smooth Finish
Time Saving
Quality Assurance
Water Curing Does not require Does not require
Shrinkage Cracks Does not appear

Technical Details

Physical Properties
Parameters Units
Dry Bulk Density 667-695 kg/m3
Wet Bulk Density 1.32-1.46 gm/cm3
Initial Setting Time 14-18 minutes
Final Setting Time 24-26 minutes
Compressive Strength 15-17 N/mm2
Approx Coverage 87-92 m2/t
Chemical Properties
Parameters Units
Silicon Dioxide (SIO2) 0.01%
Aluminium Oxide (Al2O3) n.d.
Iron (III) Oxide (Fe2O3) n.d.
Calcium Sulfate (Caso4) 97.27%
Diphosporus Pentoxide(P2O5) n.d.
Manganese Oxide (MnO) n.d.
Sulfur Trioxide (So3) n.d.
Sodium Oxide (Na2O) n.d.
Potassium Oxide (K2O) n.d.
Loss On Ignition (L.O.I) 5.52%

n.d.= Less than distinguish limit
Adhere to standard IS 2574, Part II, 1976

Safety Instruction: VANS Gyplast is absolutely free from any lime or toxic elements. In case it comes in contact with the eyes or live wound, please wash away with fresh normal water. Consult doctor if irritation continues.

Our Gyplast Client